S&B ID: 47BED

Stille imagiQ2 operating table for C-arm

Cather Tray

US Flexible Anesthesia Screen

Good to know:

• The main switch should be in the “Up” position to start the table (it is shipped in the “off/down” position) To find the main switch on the base of the table please consult the “Main switch (power ON & OFF)” educational video at:

  www.stille.se/movies/imagiq2-product-training/

• The pan handle has a tension adjustment. Make sure you keep it tight to the side rail.

• The table can also be operated with AC power. STILLE recommends for the battery to be fully charged before first time use.

• Make sure the battery is properly charged during at least 12 hours for standard battery /24 hours for battery upgrades before first time use.

Daily control before procedures

• The operator should have knowledge how to operate the device, be aware of warnings and signals described in the user manual and the user manual should always be available. For a video presentation of the table use please consult the educational video channel at: www.stille.se/movies/imagiq2-product-training/

• The operator should perform a function according to steps A-I (See FIRST TIME USE procedure).

• Test the device for proper function and inspect cables for cuts and other damage. If in doubt, replace the relevant parts.